W8FGU PX3 Dust Cover

PX3 dust Cover

Acrylic dust cover to protect the face of Elecraft's PX3

The PX3 Dust Cover is intended to protect the face and controls of the PX3 while sitting on a bench top in the shack or on a picnic table out on the trail. The cover is designed to fit over the front panel without interference to attached cabling.

The PX3 Dust Cover is made from clear or black opaque acrylic. It simply sits on top of the face of the PX3 and is supported on the ends with 1/8" clear acrylic square rod. All pieces of the dust cover are individually cut and welded together and then all edges are corner routed with a 1/8" round over bit to provide a snag free and smooth feel.